Tellerettes®... the Power in the Tower

Tellerette® Packing has a unique patented toroidal helix design that makes them dramatically more efficient than conventional packings for mass transfer, heat transfer and particulate collection. The newest K-series (2K & 3K) improves on the original Tellerette® design with increased open area and reduced pressure drop providing high scrubbing efficiency at velocities up to 700 fpm. This make the K series Tellerette® ideal for retrofitting existing towers that may require increased capacity, higher removal efficiency, or both.

 

There is only one place to find unique, patented Tellerette® Tower Packing: Ceilcote APC.

	1. Liquid is collected by inertial impaction. 2. Droplets form at countless interstitial holdup points. 3. As each droplet falls, it strikes the next packing element and bursts, exposing fresh surfaces to gas. 4. This agglomeration/dispersal cycle repeats continuously with no additional energy requirements. 5. Contaminants are absorbed with unique efficiency.

Tellerette® Features:

• Greater gas flow capacity permits use of smaller diameter, lower cost columns.
• Existing towers can be retrofitted for higher capacity and improved efficiency.
• Lower pressure drop reduces operating costs.
• High open area design minimizes fouling.
• High column stability. No classic flooding.
• Effective impingement of both liquid droplets and solid particulate.
• No channeling when proper liquid distribution is used.
• Reduces operating costs.
• A shallow bed of Tellerettes® provides effective mist elimination.
• Available in a wide range of materials including polypropylene, polyethylene,
  PVC, PVDF, and Tefzel.

 

Tellerette® Types:

Ceilcote APC Tellerette® Tower Packing is available in a wide range of materials including Polypropylene, Polyethylene, PVC, CPVC, PVDF, and Tefzel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Normal Packing Size	Maximum Dimensions O.D.	Loop Height	Free Volume (%)	Surface Ft2/Ft3	Average Packing Factor	Construction Material
No. 1-TypeR	1.81"	0.75"	87	55	36
No. 2-TypeR	2.75"	1.00"	93	38	18
No. 3-TypeR	3.75"	1.50"	92	30	16
No. 2-TypeK	3.25"	1.25"	95	28	11
No. 3-TypeK	4.125"	2.19"	96	22	9
= Patent Pending = Available in PE, PP, PVC, CPVC, Kynar, Noryl, Tefzel = Available in PP only

 

Product Literature Case Studies Combined Heat & Mass Transfer (contact us for a copy) 3-K Tellerette for Wastewater Treatment Odor Control (116KB) K-Series Tellerettes for HCl removal in a Crossflow Scrubber (contact us) Direct Contact Heat Transfer - No. 2 Type-K Tellerette (115KB)     Product Literature General Tellerette Info (342KB) Tellerette Bulletin Index (457KB) No. 3 Type-K Tellerette Product Sheet (327KB) Tellerette Technical Data Curve Index (Bulletins 12.10.00-12.10-92)     Visit our Product Literature page.

 

 

Tower Internals
Ceilcote Air Pollution Control offers a complete line of packing support plates and spray nozzles to complement our line of Tellerette® packing.

Features & Benefits

• Packing support plates provide maximum free passage (open area),
  minimize solids deposit and allow easy flushing and cleanability.
• A complete line of full cone spray nozzles provide for uniform distribution.
• Various spray angles and
  flow rates are available.

 

 

 

 

 

 

 

 

 

 

Tellerette® is a registered trademark of Ceilcote Air Pollution Control.